Search found 537 matches

Go to advanced search

by BITalino
Thu Oct 19, 2017 1:14 pm
Forum: Sensors
Topic: Noise and random behaviour from PZT respiration belts
Replies: 2
Views: 13

Re: Noise and random behaviour from PZT respiration belts

Hi, This is quite unusual; the PZT sensor has mechanical operating principle, and hence the main known interferences are motion artifacts. When you get a normal behaviour, is this correlated with fiddling around with the sensor wiring or something? On the subject you mentioned belts... is this behav...
by BITalino
Wed Oct 04, 2017 8:28 pm
Forum: Features
Topic: Sequence nSeq
Replies: 3
Views: 91

Re: Sequence nSeq

Hi there,

Was the pushbutton connected to all devices?

Best regards,
The BITalino Team
by BITalino
Tue Oct 03, 2017 6:49 am
Forum: Features
Topic: Sequence nSeq
Replies: 3
Views: 91

Re: Sequence nSeq

Hi, The difference between nSeqs happens because the actual recording only starts when all devices have started acquiring data. Generally there are a few milliseconds delay between them, and in this case data from the BITalino with nSeq 0 was the last to start arriving, with nSeq 4 was the second an...
by BITalino
Mon Oct 02, 2017 9:29 pm
Forum: Features
Topic: Mobile App saving data
Replies: 1
Views: 36

Re: Mobile App saving data

Hi Davide,

The files are stored by default on the memory card of your device... no additional actions required.

Through the file explorer you should be able to find the recordings. Let us know if this is not the case.

Best regards,
The BITalino Team
by BITalino
Tue Sep 19, 2017 12:52 pm
Forum: Programming APIs
Topic: Raspberry Pi + Python API: Connection unreliable
Replies: 5
Views: 112

Re: Raspberry Pi + Python API: Connection unreliable

The Python API usually works well on the Raspberry Pi also. You can configure the sampling rate, number of channels and amount of sampled read from the device. Distance between the device and the receiver is also an important factor, but we'd suggest you try modifying these parameters and see if it ...
by BITalino
Mon Sep 18, 2017 2:55 pm
Forum: Programming APIs
Topic: Raspberry Pi + Python API: Connection unreliable
Replies: 5
Views: 112

Re: Raspberry Pi + Python API: Connection unreliable

Hi there, Are the calls to the read method done in a separate thread? Given that the acquisition is time critical, if you have operations in-between calls to the read method that take much time, it may happen that the connection is dropped due to a buffer overflow on the device. Would this be the ca...
by BITalino
Fri Aug 25, 2017 6:16 pm
Forum: Sensors
Topic: How to interpret the data from the pulse oximeter?
Replies: 1
Views: 144

Re: How to interpret the data from the pulse oximeter?

Hi there, Please accept our apologies but we haven't been able to list the documentation for this sensor on our website. However, the transfer function for the SpO2 sensor should be the following for both channels: SpO2(%)=0.25*2^(10-nbits)*ADC-0.8 SpO2 - Blood oxygenation in percentage ADC - Channe...
by BITalino
Thu Aug 17, 2017 11:27 pm
Forum: BITalino kits
Topic: Notes on the usage and functionality of BITalino (r)evolution BLE devices
Replies: 1
Views: 1187

Re: Notes on the usage and functionality of BITalino (r)evolution BLE devices

Hi everyone, There have been reports of issues while using the BITalino (r)evolution BLE devices together with the Bluegiga BLED112 dongle on Windows 10. Our team has traced these issues to be originated by incorrect drivers installed. To install the correct drivers you need to: ⋅  Downloa...
by BITalino
Tue Aug 15, 2017 4:06 pm
Forum: Sensors
Topic: Accuracy of LUX Sensor
Replies: 1
Views: 149

Re: Accuracy of LUX Sensor

Hi Alex,

You can find the detailed information on the component data sheet available here:
https://www.vishay.com/docs/81579/temt6000.pdf

In case you need any additional support or further information, just let us know.

Best regards,
The BITalino Team
by BITalino
Mon Aug 14, 2017 1:36 pm
Forum: BITalino kits
Topic: 10bit BAT give me wrong value
Replies: 4
Views: 201

Re: 10bit BAT give me wrong value

Hi Gang, The battery life indicator will always be an approximation and the depletion generally isn't even linear. Nevertheless, you can always characterise the depletion curve of your particular setup to make it more accurate. We don't have a function for this that we could provide as it depends on...

Go to advanced search

cron