Xbee and OpenSignal

General information about BITalino
Yasser
Posts: 7
Joined: Mon Oct 20, 2014 4:20 pm

Xbee and OpenSignal

Postby Yasser » Mon Oct 20, 2014 5:45 pm

Dear all,

If I was able to transfer the data read from the bitalino sensors using Xbee to my computer. Will I still be able to use the OpenSignal software? OR it is only restricted to those who use the Bluetooth in the bitalino board.

Thanks in advance.

BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

Re: Xbee and OpenSignal

Postby BITalino » Mon Oct 20, 2014 7:32 pm

Yasser wrote:Dear all,

If I was able to transfer the data read from the bitalino sensors using Xbee to my computer. Will I still be able to use the OpenSignal software? OR it is only restricted to those who use the Bluetooth in the bitalino board.

Thanks in advance.


Hi,

Provided that you're able to setup a Virtual COM Port (VCP) in your OS and no changes to the firmware were made you should be able to use our OpenSignals software yes.

Feel free to contact us for any question you may have. Should you like to use our software framework to create your own application, the following link to an OpenSignals bare bone will come in handy:
https://github.com/BITalinoWorld/python-serverbit

Best regards,
The BITalino Team


Return to “BITalino kits”




cron