Is it possible to synchronise BITalino with a GPS?

General information about BITalino
BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

Is it possible to synchronise BITalino with a GPS?

Postby BITalino » Mon Jun 22, 2015 10:07 pm

Yes... there are several possibilities, namely:

1) At a software level (if there are no hard requirements in terms of accuracy in the synchronisation) it is possible to do simultaneous recording of BITalino and GPS data using the same software application.

2) At the hardware level, if the GPS has for example a binary digital output, it can be connected to one of the binary digital inputs on BITalino, in which case every time the GPS digital output changes state, such changes are simultaneously recorded by BITalino.

3) Also at the hardware level, it is possible to reprogram the firmware on the BITalino MCU to communicate directly with the GPS via the UART or SPI (preferable in order to preserve the ability to use the Bluetooth interface).

Best regards,
The BITalino Team

Return to “BITalino kits”




cron