Extending length of the electrode leads

Cables, Electrodes, Plugs, etc.
geekonacid
Posts: 5
Joined: Sun Nov 02, 2014 4:59 pm

Extending length of the electrode leads

Postby geekonacid » Fri Aug 21, 2015 1:12 pm

I have requirement to use longer electrode leads for EKG and EDA modules that the ones Bitlaino provides with their kit. Can you suggest an alternative electrode leads that would have the right port connectivity to modules but are longer (lets say up to 1 meter)?

BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

Re: Extending length of the electrode leads

Postby BITalino » Fri Aug 21, 2015 2:53 pm

Hi there,

You can virtually use any length of wire, bear in mind however that the longer the cable the higher the noise will be.

On our store we have individual electrode cables with 40cm, pre-crimped to fit the 3-pin female Molex Sherlock receptacle (other lengths available upon request):
http://store.bitalino.com/index.php/standard-account-store#!/Individual-Electrode-Cable/p/34923012/category=9071127
http://store.bitalino.com/index.php/standard-account-store#!/Molex-Sherlock-Female-Socket-3-pins/p/34923001/category=8623005

You can also use any other cables and source the 3-pin Molex Sherlock receptacle and crimp pins either from us or other vendor of your choice:
http://store.bitalino.com/index.php/standard-account-store#!/Molex-Sherlock-Female-Socket-3-pins/p/34923001/category=8623005
http://store.bitalino.com/index.php/standard-account-store#!/Crimp-Pins/p/34923007/category=8623005

In case you have any further question just let us know.

Best regards,
The BITalino Team

geekonacid
Posts: 5
Joined: Sun Nov 02, 2014 4:59 pm

Re: Extending length of the electrode leads

Postby geekonacid » Sat Aug 22, 2015 4:02 pm

Great, thank you for quick reply!


Return to “Accessories”




cron