What's the meaning of the LEDs on the MCU block?

MCU, Firmware, etc.
BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

What's the meaning of the LEDs on the MCU block?

Postby BITalino » Fri Sep 26, 2014 1:12 pm

The MCU block has two built-in LEDs. The white LED is used to show the status of the system; FADING means that the system is in standby, BLINKING means that the system is in acquisition mode. The red LED is an indication of low battery, which by default is set to turn on approximately when the battery reaches 15-20% capacity.

Return to “Microcontroller”