By default the device is programmed to connect to a network named "riot". You can change default setting making device enter on Association Point (AP) mode and then selecting new settings.
1) Connect GPIO28 to GND;
2) Connect battery and turn device on. The led will blink red (very fast), then will turn blue and finally green;
https://drive.google.com/open?id=0B6jgm ... WxlcWRpWUE
Connect to R-IoT
1) On your laptop connect to a network named "riot-xxxx";
2) Open your browser and write "192.168.1.1". Select the new configurations and click on "submit";
3) Turn off and turn on. The device is now ready with new configurations;