What is the sensor-connector assignment in BITalino Plugged?

Bluetooth, USB, UART, Storage, etc.
BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

What is the sensor-connector assignment in BITalino Plugged?

Postby BITalino » Wed Jan 01, 2014 11:15 pm

If you look on the back of the board you'll see a few pins labeled as A's and a few pins labelled as I's on the RJ plugs.

Apart from the fact that A X correspond to analog input X and I Y correspond to digital input Y, each input is general purpose.

As such you should be able to connect the ECG, EMG, EDA, ACC, and LUX to any A channel.

If you are using the OpenSignals software for data acquisition, this information will also be of use: viewtopic.php?f=15&t=94

Return to “I/O”




cron