Is it possible to achieve higher baud rates via BT module?

Bluetooth, USB, UART, Storage, etc.
Velu
Posts: 6
Joined: Fri Nov 03, 2017 12:26 pm

Is it possible to achieve higher baud rates via BT module?

Postby Velu » Mon Nov 27, 2017 12:17 pm

Dear Team,

I am using the Freestyle BT Kit. And I am using STM32 to configure USART.

Is it possible to set higher baud rates than the specified 115200 baud?

Thanks,
Velu

BITalino
Site Admin
Posts: 567
Joined: Tue Aug 27, 2013 3:47 pm

Re: Is it possible to achieve higher baud rates via BT module?

Postby BITalino » Mon Nov 27, 2017 12:25 pm

Hi Velu,

The BITalino BT block uses the HC-06 module... you can see the complete data sheet and features here:
http://bitalino.com/datasheets/HC06_Datasheet.pdf

Best regards,
The BITalino Team

Velu
Posts: 6
Joined: Fri Nov 03, 2017 12:26 pm

Re: Is it possible to achieve higher baud rates via BT module?

Postby Velu » Mon Nov 27, 2017 11:18 pm

Thanks for the datasheet.

It is indeed possible to set any baud rate by entering into the AT command mode.

Regards,
Velu


Return to “I/O”




cron